We are looking for THIRD PARTY INSPECTORS from below listed locations :

Malaysia, Indonesia, Thailand, Vietnam, India, China, South Korea, Japan, Taiwan, Italy, United Kingdom, Germany, France

Structural / Painting Inspector (General Inspector)

Open for Malaysian Sarawakian &  Vietamese

·        Certified to at least one of the following;

·        Certified CSWIP 3. I/PCN Level Il/ AWS-2CWl and certification

·        Certified CSWIP-BGAS level 2 or higher/ NACE level 2

·        A minimum of 10 years' experiences as Structural QA/QC Inspector (with EPCC contractor/Client) or higher position

·        Technically qualified and able to demonstrate an extensive knowledge of structural fabrication and construction methods for the offshore oil and gas industry, including structural codes and standards, regulatory requirements

·        Has been formally trained with hands on experience and knowledge in welding procedures and techniques and structural NDT methods

·        Knowledgeable in welding, NDT, AWS D 1.1, NACE, SSPC, British Standard, codes or other industry codes and standards related to Structural and Painting inspections.

 

Piping/Mechanical (General Inspector)

Open for Malaysian Sarawakian &  Vietnamese

·        Certified CSWIP 3.1/PCN Level Il and must be Malaysian Sarawak currently valid during time of employment.

·        10 Years experiences as a Piping / Mechanical QA/QC inspector (with EPCC Contractor/ Client) or higher position.

·        Technically qualified and able to demonstrate experience and a working knowledge of PFD's; P&l D’s; Piping Isometrics; Piping GA's; Materials              

·        Selection; Support methodology, techniques and applications; piping NDT methods; hydro-testing & leak testing; onshore piping fabrication and construction methods for the offshore oil and gas industry, including codes and standards, regulatory requirements, and operational and maintenance requirements.

·        Technically qualified and able to demonstrate experience and a working knowledge in inspection of mechanical static/rotating equipment, alignments; machine set-up; foundations and levelling methods; preliminary testing; welding and common NDT methods

·        Knowledgeable in welding, NDT, ASME B31.3/ASME  831.8/ASME IX/ASME VIII/ASTM/API 1 104/ API 675 codes or other industry codes and standards related to piping, static and rotating inspections.

 

Instrumentation Inspector (Malaysians Only)

·        Must be educated to Diploma level and with a Malaysian Sarawak Diploma in Instrumentation and Controls or other related engineering discipline.

·        10 Years experiences as an Instrumentation QA/QC Inspector (with EPCC Contractor/ Client) or higher position.

·        Technically qualified and able to demonstrate experience and a working knowledge of Single Line Diagrams; Block Diagrams; Termination Diagrams; Loop Testing (Cold and Hot) Process Control Systems; Safety Instrument Systems; and ICSS systems and to demonstrate experience and a knowledge of onshore fabrication and construction techniques and methodologies for offshore oil and gas installations, including applicable codes and standards, regulatory requirements, and operational and maintenance requirements.

·        Must be certified and approved for IECEX Inspections to meet offshore oil and gas standards. Knowledgeable in ATEX requirements, and relevant codes and standards.

 

Electrical Inspector (Malaysians Only)

·        Must be educated to Diploma level and with a Malaysian        Sarawak Diploma in electrical Engineering or other related engineering discipline

·        10 Years experiences as an Electrical QA/QC Inspector (with EPCC Contractor/ Client) or higher position.

·        Technically qualified and able to demonstrate experience and a working knowledge of Single Line Diagrams; Block Diagrams; Termination Diagrams; Power Generation Systems; Electrical Switchboards; Emergency Backup UPS Systems; Small Power & Lighting systems;         and Earthing Systems and Temporary Power            systems. Able to demonstrate experience and a working knowledge of onshore fabrication and construction techniques and methodologies for offshore oil and gas installations, including applicable codes and standards, regulatory requirements,        and         operational            and maintenance requirements.

·        Must be certified and approved for IECEX Inspections to meet offshore oil and gas standards.  Knowledgeable     in            ATEX requirements, and relevant codes and standards.

Pipeline Inspector (Malaysian Only)

·        Must be educated to Diploma level and with Malaysian Sarawak experience and a working knowledge of API, along with certification CSWIP 3.1/PCN Level II or equivalent and must be currently valid during time of employment.

·        10 years’ experience as pipeline QAQC inspector with extensive experience in the manufacture and installation of pipelines, risers and J Tubes.

·        Technically qualified and able to demonstrate a working knowledge of onshore fabrication and manufacturing processes for pipelines. Experience shall also include associate cross-country pipeline and safe working practices to meet oil and gas requirements, codes and standards, regulatory, operational and maintenance requirements.

·        Knowledgeable in welding, NDT, ANSI/API codes or other industry codes and standards related to pipelines manufacturing and installation.

 

NDT Inspector (Malaysian Only)

·        Must have an experience and a working knowledge of NDT, along with certification CSWIP 3.4/PCN Level II or equivalent and must be currently valid during time of employment

·        10 years’ experience as a NDT/QAQC/ Inspector with extensive experience in the NDT technique and acceptance criteria

·        Experience shall also include associated offshore installation methodologies and safe working practices to meet oil and gas requirements, codes and standards regulatory, operational and maintenance requirements.

·        Experience and knowledgeable in welding on structural and piping disciplines

·        Knowledgeable in welding, NDT, ANSI/API codes or other industry codes and standards.

 

Source Inspector (All Disciplines)

·        Experience and working knowledge with Diploma /Certificates in relevant QAQC inspection discipline; i.e Structural; Piping & Mechanical; Controls & Instrumentation; Electrical etc.

·        Valid Certificate in applicable trade depending on equipment such as AWS-CWI/CSWIP 3.1 Welding Inspection, PCN Level 2, Welding Inspection, IECEX Certification, EX 001/003/007/008 and other related certification.

·        Minimum 10 years related experience inspection and testing activities related to manufacturing processes, fabrication & construction and installation for the offshore oil and gas industry.

·        Minimum 5 years working  as Source Inspection for a #rd Party / EPOCC contractor / Client.

·        Well versed with relevant international codes, standards, specifications such as ASME B31.3, ASME B31.4, ASME B31.8, AWS d1.1, API 1104, ASTM, ATEX, IEC, API 650, and other related standards.

·        Source Inspection Location:

a)      Indonesia

b)      Thailand

c)       Vietnam

d)      India

e)      China

f)        South Korea

g)      Japan

h)      Taiwan

i)        Italy

j)        United Kingdom

k)       Germany

l)        France

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ENERGY WORKFORCE GROUP (EWF Group) of Companies is incorporated as a leading full range advance inspection service provider, vendor inspection, technical manpower supply, marine inspection, training & consultancy company.
We specialize in providing complex solutions for various industries ranging from upstream, midstream & downstream assets.